After installing Windows 7 x64 on my PowerPro P 11:15, I still had some devices in Device Manager without drivers. Included in this list were the following:
Base System Device
- Hardware ID: PCI\VEN_1180&DEV_0843&SUBSYS_002514C0&REV_12
- This is actually a “Ricoh SD/MMC Host Controller”
- Solution: Installed setup.exe from \08.CardReader\3.51.01(WHQL).zip
Base System Device
- Hardware ID: PCI\VEN_1180&DEV_0592&SUBSYS_002514C0&REV_12
- This is actually a “Ricoh Memory Stick Controller”
- Solution: Installed setup.exe from \08.CardReader\3.51.01(WHQL).zip (solving the Ricoh SD/MMC Host Contoller above will solve this simultaneously)
PCI Memory Controller
- Hardware ID: PCI\VEN_8086&DEV_444E&SUBSYS_444E8086&REV_01
- This is actually the “Intel Turbo Memory Controller (Robson cache)
- I still haven’t gotten this working.
Unknown Device
- Hardware ID: ACPI\CPL0002\2&DABA3FF&1
- This is actually the “COMPAL Embedded System Control” (the Wireless Select Switch)
- Solution: EMSC driver for the Wireless Select Switch can be downloaded from http://fl90.tumblr.com/. Then install the setup.exe from \16.WirelessSelectSwtich\2.0.0.2
- This is NOT the “Smart Battery” as reported by many web sites
Unknown Device
- Hardware ID: ACPI\ENE0100\3&33FD14CA&0
- This is actually the “ENE CIR Receiver”
- Solution: Installed the drivers from \15.CIR\V1.3(WHQL)\Vista
- http://wiki.answers.com/Q/What_is_ENE_CIR_Receiver (Consumer IR Receiver)