Base System Device

• Hardware ID: PCI\VEN_1180&DEV_0843&SUBSYS_002514C0&REV_12
• This is actually a “Ricoh SD/MMC Host Controller”
• Solution: Installed setup.exe from \08.CardReader\3.51.01(WHQL).zip

Base System Device

• Hardware ID: PCI\VEN_1180&DEV_0592&SUBSYS_002514C0&REV_12
• This is actually a “Ricoh Memory Stick Controller”
• Solution: Installed setup.exe from \08.CardReader\3.51.01(WHQL).zip (solving the Ricoh SD/MMC Host Contoller above will solve this simultaneously)

PCI Memory Controller

• Hardware ID: PCI\VEN_8086&DEV_444E&SUBSYS_444E8086&REV_01
• This is actually the “Intel Turbo Memory Controller (Robson cache)
• I still haven’t gotten this working.

Unknown Device

• Hardware ID: ACPI\CPL0002\2&DABA3FF&1
• This is actually the “COMPAL Embedded System Control” (the Wireless Select Switch)
  • Solution: EMSC driver for the Wireless Select Switch can be downloaded from http://fl90.tumblr.com/.  Then install the setup.exe from \16.WirelessSelectSwtich\2.0.0.2
• This is NOT the “Smart Battery” as reported by many web sites
  • Smart Battery Driver: http://www.compal.com/Download/NB/JFL92_JFT02/Application/17.Smart Battery/1.0.0.10/20070605_CplSMB_V1.0.0.10_Release.zip

Unknown Device

• Hardware ID: ACPI\ENE0100\3&33FD14CA&0
• This is actually the “ENE CIR Receiver”
• Solution: Installed the drivers from \15.CIR\V1.3(WHQL)\Vista
• http://wiki.answers.com/Q/What_is_ENE_CIR_Receiver (Consumer IR Receiver)

Compal JFL92

Similar to Sager NP2090/COMPAL IFL90/PowerPro J 10:15 — these are all the same model and are lower-end than the NP2092

According to Sager, the NP2090, NP2092, FL90, and JFL92 all use the same drivers

Resellers:

• http://www.compal.com/asp/driver_dnd/index.htm
• http://www.powernotebooks.com/support/
• http://www.xoticpc.com/support-ip-18.html
• http://www.sagernotebook.com/information.php?information_id=19
• ftp://ftp.littlebit.ch/Littlebit%20Systems/Notebook/Stingray%20Z84%20%28FL90%29/Driver/